¡¼Notice¡½water based varnish, OPV
Classification
New Products
Water-Based-Varnish
OPV
Water-Based Polyurethane
Water-Based Acrylic Emulsion & Resin
Water-Based Additives
Water-Wooden-Paint
Gold Print
Contact Us
Address:No.10 ZHAOFENG ROAD SHISHAN IND . DISTRICT A ZONE NANHAI FOSHAN GUANGDONG PROVINCE CHINA
Tel:+86-757-86401559
Fax:+86-757-86403859
Email:Norman@water-based-varnish.com
Products
Water-based
¡¾Details¡¿
Model: H-6007
Name: Water-based polish OPV

Description: H-6007 is a water-based eco-friendly high gloss varnish (commonly known as polished overprint varnish). With high wear resistance, excellent gloss, good gloss and color retention, fast-drying, the ink on a wide variety of affinity. Can afford to use version, version off smoothly, giving the print quality of the mirror effect. It can used For electronic and electrical appliances, pharmaceuticals, packaging and other high-grade alcohol and tobacco packaging.

Appearance: milky white liquid,
Solids 32%,
Viscosity (seconds): 13 ~ 15, (Viscosity Cups 3 , 25¡æ),
Gloss: 80 ¡À 5

Notes:
1, It based on conditions of use plus appropriate diluent (water) or alcohol and water (1-5:1) mixture dilution. In order to achieve gloss and abrasion resistance requirements of the situation according to the paper, roll coated with light plus 5 to about 15% thinner, with inline coating liquid, the use of high viscosity coating process should be adjusted to increase the amount of diluent the appropriate viscosity.
2, Varnish on paper should meet the principle, if excessive dilution will affect gloss, abrasion resistance and leveling; the contrary will result in dilution of inadequate leveling varnish is not good, the drying rate is too slow .
3, depending on fuel quality and gloss paper requirements, are generally on-line coating of :2-5 g / m, offline coating 3-7 / m.
4, drying method: to use infrared drying, hot air or heat pipe heating and drying. Drying equipment operation during the first table shows the temperature not lower than 70 ¡æ.
5, Take 12 hours after polishing of the varnish in order to achieve optimal performance.
6,It can use water to clean equipment, the dry varnish can used Isopropyl alcohol or alcohol to clean.
7, the product of alkali-soluble varnish, when veneer to the cartons (laminating), try to choose a neutral or weakly alkaline (PH ¡Ü 10) adhesives, when used starch caustic soda glue (yellow glue) fluid, Please be strictly controlled to avoid excess glue with a glue penetrate varnished surface caused by dissolution of the coating adhesive.

Package:
25KG/50KG/120KG plastic containers, sealed in a cool place, the shelf life is one year. 

Name£º
*
Email£º
*
Tel£º
Place of work£º
Product NO.£º
*
Other Requirements£º
*
Verification Code£º
2151 *
Address:No.10 ZHAOFENG ROAD SHISHAN IND . DISTRICT A ZONE NANHAI FOSHAN GUANGDONG PROVINCE CHINA
Tel:+86-757-86401559 Fax:+86-757-86403859 Email:Norman@water-based-varnish.com
ICP-10084523 ADMIN © Hongshu water-based priting and coating material co.; ltd
Realand| Website Design: FoShan SEO| Website Company